I see FS0 with the X86E921EO.iso CDROM.
I see 3 BLK devices mentioned in docs.
VMS install:
No target devices are available for install.
Is there a missing step to map storage for VMS?
From the UEFI Shell:
Code: Select all
EFI Interactive Shell v2.2
EDK II
UEFI v2.70 (EFI Development Kit II / OVMF, 0x00010000)
Mapping table
FS0: Alias(s):CD0c0:;BLK1:
PciRoot(0x0)/Pci(0x1,0x1)/Ata(0x0)/CDROM(0x0)
BLK2: Alias(s):
PciRoot(0x0)/Pci(0x7,0x0)/Sata(0x1,0xFFFF,0x0)
BLK3: Alias(s):
PciRoot(0x0)/Pci(0x7,0x0)/Sata(0x2,0xFFFF,0x0)
BLK0: Alias(s):
PciRoot(0x0)/Pci(0x1,0x1)/Ata(0x0)
Press ESC in 1 seconds to skip startup.nsh or any other key to continue.
Shell> map -b
Mapping table
FS0: Alias(s):CD0c0:;BLK1:
PciRoot(0x0)/Pci(0x1,0x1)/Ata(0x0)/CDROM(0x0)
BLK2: Alias(s):
PciRoot(0x0)/Pci(0x7,0x0)/Sata(0x1,0xFFFF,0x0)
BLK3: Alias(s):
PciRoot(0x0)/Pci(0x7,0x0)/Sata(0x2,0xFFFF,0x0)
BLK0: Alias(s):
PciRoot(0x0)/Pci(0x1,0x1)/Ata(0x0)
Shell>
From BOOTMGR:
BOOTMGR> DEVICES FS
UEFI FILE SYSTEM DISKS:
FS0 (DVD) = FS0 Part:0, UEFI: E9_2_1 OpenVMS Disk
2/14/2023 11:26 <DIR> 2,048 .
VSI OpenVMS Boot Manager: V9.2-1, Build 122
ENABLED: Symmetric Multi-Processing
ENABLED: Crash Dump Processing
ENABLED: Console output to Legacy COM 1 Port
Checking Required Processor Features:
PASSED
%VMS_BOOTMGR-W-DEVICE, Ignoring ATAPI device...
BOOT MANAGER DEVICE: FS0
DEFAULT BOOT COMMAND: BOOT FS0 0 00000000
VIRTUAL MACHINE GUEST:
KVM (tm) No Mouse support; Use Command or Arrow Keys
CONNECT A REMOTE TERMINAL SESSION NOW.
BOOTMGR>
BOOTMGR> BOOT
Booting...
%VMS_BOOTMGR-I-INSTALL, Booting an OpenVMS Installation Kit...
100%
%VMS_BOOTMGR-I-HWRPB, Unable to determine System Serial Number
%%%%%%%%%%% VSI OpenVMS (tm) x86-64 %%%%%%%%%%%
_______________________________________________
GRAPHICAL OUTPUT HAS BEEN SUSPENDED
USE A TERMINAL UTILITY FOR ACCESS
_______________________________________________
No ACPI MCFG table was found. This processor may not have a PCIe configuration space.
VSI Primary Kernel SYSBOOT Jan 23 2023 14:03:45
%SYSBOOT-I-VMTYPE, Booting as a KVM (tm) Guest
VMS Software, Inc. OpenVMS (TM) x86_64 Operating System, E9.2-1
Copyright 2023 VMS Software, Inc.
MDS Mitigation active, variant verw(MD_CLEAR)
%SMP-I-CPUTRN, CPU #1 has joined the active set.
Installing required known files...
Configuring devices...
****************************************************************
You can install or upgrade the OpenVMS X86-64 operating system
or you can install or upgrade layered products that are included
on the OpenVMS X86-64 distribution media.
You can also execute DCL commands and procedures to perform
"standalone" tasks, such as backing up the system disk.
Please choose one of the following:
1) Upgrade, install or reconfigure OpenVMS X86-64 Version E9.2-1
2) Display layered products that this procedure can install
3) Install or upgrade layered products
4) Show installed products
5) Reconfigure installed products
6) Remove installed products
7) Find, Install or Undo patches; Show or Delete Recovery Data
8) Execute DCL commands and procedures
9) Shut down this system
Enter CHOICE or ? for help: (1/2/3/4/5/6/7/8/9/?) 1
***********************************************************
This procedure will ask a series of questions.
() - encloses acceptable answers
[] - encloses default answers
Type your response and press the <Return> key. Type:
? - to repeat an explanation
^ - to change prior input (not always possible)
Ctrl/Y - to exit the installation procedure
This procedure installs the OpenVMS X86-64 operating system.
All software and data files that were previously on the
target disk will be removed.
Do you want to INITIALIZE or to PRESERVE? [PRESERVE] initialize
You must enter the device name for the target disk on which
OpenVMS X86-64 will be installed.
Enter device name for target disk: (? for choices) ?
Device Name Device Type Name Volume Label Size (blocks/xB)
------------ ------------------------- -------------- --------------------
No devices named * found
Enter device name for target disk: (? for choices)