Decnet plus and TCP/IP services installed and working fine, but:
Code: Select all
$ show net
Product: DECNET Node: VMS2 Address(es): 1.10
Product: TCP/IP Node: <TCP/IP host/node name not yet available> Address(es): 0.0.0.0
$ show net "TCP/IP" /full
Product: TCP/IP Manufacturer: VMS Software, Inc.
Node: [b]<TCP/IP host/node name not yet available> Address(es): 0.0.0.0[/b]
Network Type: TCP/IP Interface(s):
VSI TCP/IP Services for OpenVMS x86_64 Version X6.0
on a QEMU Standard PC (Q35 + ICH9, 2009) running OpenVMS E9.2-1
Port Remote
Device_socket Type Local Remote Service Host
bg26 STREAM 49152 0 *
bg27 STREAM 49153 49152 127.0.0.1
bg28 STREAM 49152 49153 127.0.0.1
bg35 DGRAM 68 0 *
bg37 RAW_IP 0 0 *
bg43 STREAM 21 0 FTP *
bg54 STREAM 22 0 SSHD22 *
bg1081 STREAM 22 55301 SSHD22 192.168.1.158
bg1092 STREAM 49196 49195 127.0.0.1
bg1093 STREAM 49195 49196 127.0.0.1
Communication Parameters
Local host: VMS2 Domain: fritz.box
Maximum Current Peak
Proxies 20
Remote Terminal
Large buffers: 0
UCBs: 0
Virtual term: disabled
I can happily ssh into the VM from my network, and as above the interface is mapped and working#
So why is it showing <TCP/IP host/node name not yet available> Address(es): 0.0.0.0
Also it is showing an ip address that is not being used - it has correctly been given 192.168.1.137
Any ideas?
Chris