With a crash dump from an X86 is there a way to analyze the dump on an Itanium system?
OpenVMS system dump analyzer
Unable to determine platform; no platform bits are set in dump
%SDA-E-NOTI64DUMP, dump file does not contain an OpenVMS I64 dump
Crash analysis
-
- Master
- Posts: 199
- Joined: Fri Aug 14, 2020 11:31 am
- Reputation: 0
- Status: Offline
Re: Crash analysis
You would need a running system with the same architecture as the crashed one for crash analysis. The cross tools do not seem to include a SDA version for x86-64.
Can't you boot from the installation media (.ISO) ? Or try a minimum boot. ANALYZE/CRASH should work.
Did the crash system at least boot once after the crash ? Is so, you should have a CLUE file (CLUE$node_ddmmyy_hhmm.LIS) in SYS$COMMON:[SYSERR]. This would be a good start to look for a crash problem.
As you seem to be running some version of VSI OpenVMS x86-64, you should also have access to VSI support.
Volker.
Can't you boot from the installation media (.ISO) ? Or try a minimum boot. ANALYZE/CRASH should work.
Did the crash system at least boot once after the crash ? Is so, you should have a CLUE file (CLUE$node_ddmmyy_hhmm.LIS) in SYS$COMMON:[SYSERR]. This would be a good start to look for a crash problem.
As you seem to be running some version of VSI OpenVMS x86-64, you should also have access to VSI support.
Volker.
-
- VSI Expert
- Contributor
- Posts: 16
- Joined: Sat Sep 11, 2021 10:24 pm
- Reputation: 0
- Status: Offline
Re: Crash analysis
re: The cross tools do not seem to include a SDA version for x86-64.
The cross-tools kit does in fact contain a cross-version of SDA...and here's an example of how you'd use it:
VSI recommends that the native version of SDA be used, but in a pinch the cross-built/cross-architecture version will do the job.
bw
The cross-tools kit does in fact contain a cross-version of SDA...and here's an example of how you'd use it:
Code: Select all
fred_system> @X86_XTOOLS$ROOT:[EVAX.XSDA]X86_SDA.COM STAGED$:[DUMPS]BARNEY_OPERCRASH_220727_1746.DMP
%X86_SDA-I-Defining SDA$READ_DIR...
OpenVMS system dump analyzer
...analyzing an x86-64 compressed selective memory dump...
Dump taken on 27-JUL-2022 17:46:02.88 using version V9.2
OPERCRASH, Operator forced system crash
SDA>
bw
-
- Master
- Posts: 199
- Joined: Fri Aug 14, 2020 11:31 am
- Reputation: 0
- Status: Offline
Re: Crash analysis
Hi,
I'm interested in the CLUE file from this OpenVMS x86-64 crash, as I'm currently trying to bring back the CANASTA tool (VMS automated crashdump analysis tool from the Digital days) back to VSI.
I've sent you a PM.
Thanks,
Volker.
I'm interested in the CLUE file from this OpenVMS x86-64 crash, as I'm currently trying to bring back the CANASTA tool (VMS automated crashdump analysis tool from the Digital days) back to VSI.
I've sent you a PM.
Thanks,
Volker.