(9909) TCP/IP ENABLE and DISABLE SERVICE? BIND?

Archive of the OpenVMS Ask the Wizard (ATW) questions and answers database.
Locked

Topic author
User
Visitor
Posts: 0
Joined: Mon Jan 10, 2022 8:16 am
Reputation: 0
Status: Offline

(9909) TCP/IP ENABLE and DISABLE SERVICE? BIND?

Post by User » Thu Nov 04, 2004 8:26 am

How do I resolve a bind problem?
show service displays the following

Code: Select all

TCPIP> sh serv

Service             Port  Proto    Process          Address            State

BIND                  53  TCP,UDP  TCPIP$BIND       0.0.0.0             Disabled
ESNMP                705  UDP      ESNMP            0.0.0.0             Disabled

When I try to start bind service the following is displayed
TCPIP&
TCPIP> enable service b
%TCPIP-I-SERVSTARTED, BIND service already started
TCPIP&
Last edited by marty.stu on Thu Aug 18, 2022 9:04 am, edited 1 time in total.


Wizard
Visitor
Posts: 0
Joined: Mon Jan 10, 2022 8:17 am
Reputation: 0
Status: Offline

Re: (9909) TCP/IP ENABLE and DISABLE SERVICE? BIND?

Post by Wizard » Fri Nov 05, 2004 8:26 am

Stop TCP/IP services entirely, and use the configuration menu tool TCPIP$CONFIG to enable and start the BIND server.

The OpenVMS Wizard generally (and strongly) recommends against use of the TCPIP utility ENABLE and DISABLE SERVICE commands, in favor of using the provided TCPIP$*STARTUP and TCPIP$*SHUTDOWN procedures. ENABLE SERVICE and DISABLE SERVICE are inviting, but can unfortunately leave the associated component process(s) in an indeterminate state.

Do also ensure that your OpenVMS and TCP/IP Services ECOs are all current, as well.
Last edited by marty.stu on Thu Aug 18, 2022 9:04 am, edited 1 time in total.

Locked