Now we connect VAX statio with Simatic S5 PLC.
We want change Simatic S5 to Simatic S7 PLC.
What software we need will be useed and buy for connect PLC and VAX ? (We
used BASEstar Open + DCM)
(9800) BASEstar Open and Siemens Simatic PLC?
Re: (9800) BASEstar Open and Siemens Simatic PLC?
The OpenVMS Wizard would check both with the vendor of the PLC or
directly wwith Siemens Simatic, and with the BASEstar package
hardware support listings. The Siemens Simatic does not appear
to be formally and directly supported with BASEstar Open, though
there does appear to be at least one third-party connection for
the Siemens MPI adapter connection and BASEstar Open via EIA485
(RS485) multidrop.
directly wwith Siemens Simatic, and with the BASEstar package
hardware support listings. The Siemens Simatic does not appear
to be formally and directly supported with BASEstar Open, though
there does appear to be at least one third-party connection for
the Siemens MPI adapter connection and BASEstar Open via EIA485
(RS485) multidrop.