Cannot change settings after moving project

Here you can discuss the universal Integrated Development Environment for OpenVMS.
Post Reply

Topic author
willemgrooters
Valued Contributor
Posts: 87
Joined: Fri Jul 12, 2019 1:59 pm
Reputation: 0
Location: Netherlands
Status: Offline
Contact:

Cannot change settings after moving project

Post by willemgrooters » Tue Jan 04, 2022 2:48 pm

VSCode and VMS-IDE most recent.

Moved project to another system, using the same root-specification using system logical USER in synchronizer settings and launch settings; in ssh-helper-settings the nodename has been changed (obviously).
But changes in synchronizer-settings and ssh-helper-settings seems to be wrong the error:

Code: Select all

Draft 2020-12 schemas are not yet fully supported.
but in lauch no error.
Result is that I cannot connect to this system using VMS-IDE, but login using Putty or FTP is no problem; defined structure in VMS-IDE is OK: all files are available.
synchronizer-settings:

Code: Select all

        "root": "/user/wg/wgcms",

Code: Select all

$ sho log user/full
   "USER" [super] = "DQA1:[USER.]" [concealed,terminal] (LNM$SYSTEM_TABLE)
$ dir user:[wg]

Directory USER:[WG]

SETUP.COM;79        TEMP.DIR;1          WGCMS.DIR;1         WGLIB.DIR;1

Total of 4 files.
$
so that seems to be OK.


ssh-helper-settings:

Code: Select all

    "connection": {
        "host": "daphne.grootersnet.local", <<-- changed from previous system: can be found (otherwise VMS output cannot be shown)
Login on acces fails (correct password on access, files cannot be found:
client error: Error: Handshake failed: signature verification failed
Cannot find files on remote source
Synchronization failed. [WGCMS]
Settings: failed to fill some data while loading
Last edited by willemgrooters on Tue Jan 04, 2022 2:53 pm, edited 1 time in total.


sergey_vorfolomeev
VSI Expert
Valued Contributor
Posts: 98
Joined: Thu Aug 22, 2019 12:17 am
Reputation: 0
Status: Offline

Re: Cannot change settings after moving project

Post by sergey_vorfolomeev » Tue Jan 04, 2022 9:56 pm

Hi

Seems like the system You moved to has too old SSH server and it is not supported by modern SSH library.

Change the next field for corresponding host in "vmssoftware.ssh-helper-settings.json" file:
"skipSignatureVerification": true,

If You cannot see this filed, open settings via command "VMS-IDE: Edit ssh-helper settings"
vms-ide-ssh-settings.png
The warning in the json file doesn't affect anything.


Topic author
willemgrooters
Valued Contributor
Posts: 87
Joined: Fri Jul 12, 2019 1:59 pm
Reputation: 0
Location: Netherlands
Status: Offline
Contact:

Re: Cannot change settings after moving project

Post by willemgrooters » Wed Jan 05, 2022 4:21 am

Weird. Previously running HP vms 8.4 which worked without a problem, but putty warned on this. New system is VSI VMS084-2L1, no warning in Putty but VMS-IDE fails....

Post Reply