[Unsupported config]Bug check during boot with bare metal SATA
Posted: Fri Jun 16, 2023 2:38 pm
After the release of V9.2-1 I wanted to see if adding the device IDs for the SATA controllers in AHCI mode would cause the machine to crash during boot still. After seeing the addition of VirtIO drivers for KVM/Virtualbox or at least the foundations of... I was inspired. The following transcript is from a modified install ISO. Similar behavior was found from a rebuilt boot memory disk and additions to user_config.dat.
If there is interest in more info, or working on this I'd be happy to provide whatever nessissary.
If there is interest in more info, or working on this I'd be happy to provide whatever nessissary.
Code: Select all
VSI OpenVMS Boot Manager: V9.2-1, Build 122
ENABLED: Symmetric Multi-Processing
ENABLED: Crash Dump Processing
ENABLED: Console output to Legacy COM 1 Port
Checking Required Processor Features:
PASSED
BOOT MANAGER DEVICE: DMM0
DEFAULT BOOT DEVICE: DMM0
AUTOACTION: BOOT DMM0 0 00000000 (Countdown = 5)
CONNECT A REMOTE TERMINAL SESSION NOW.
Press <ESC> to stop automatic action or any other key to skip countdown and continue.
5...4...3...2...1...
Booting...
%VMS_BOOTMGR-I-INSTALL, Booting an OpenVMS Installation Kit...
%%%%%%%%%%% VSI OpenVMS (tm) x86-64 %%%%%%%%%%%
%%%%%%%%
%%%
_______________________________________________
GRAPHICAL OUTPUT HAS BEEN SUSPENDED
USE A TERMINAL UTILITY FOR ACCESS
_______________________________________________
VSI Primary Kernel SYSBOOT May 16 2023 13:21:17
VMS Software, Inc. OpenVMS (TM) x86_64 Operating System, V9.2-1
Copyright 2023 VMS Software, Inc.
MDS Mitigation active, variant haswell(HASWELL/BROADWELL)
%SMP-I-CPUTRN, CPU #9 has joined the active set.
%SMP-I-CPUTRN, CPU #8 has joined the active set.
%SMP-I-CPUTRN, CPU #2 has joined the active set.
%SMP-I-CPUTRN, CPU #3 has joined the active set.
%SMP-I-CPUTRN, CPU #1 has joined the active set.
%SMP-I-CPUTRN, CPU #6 has joined the active set.
%SMP-I-CPUTRN, CPU #12 has joined the active set.
%SMP-I-CPUTRN, CPU #4 has joined the active set.
%SMP-I-CPUTRN, CPU #10 has joined the active set.
%SMP-I-CPUTRN, CPU #7 has joined the active set.
%SMP-I-CPUTRN, CPU #13 has joined the active set.
%SMP-I-CPUTRN, CPU #5 has joined the active set.
%SMP-I-CPUTRN, CPU #11 has joined the active set.
Installing required known files...
Configuring devices...
MMG$PAGEFAULT IPLHI:
Fault_VA: 00000000000004AC
Err Code: 0000000000000000
MMF_Flags: 0000000000000000
Intstk_p: FFFFFFFFA48D3C80
RIP: FFFF830064C5E92A
Int_ps: 0000000000000800
*** Page Fault IPL Too High ***
VSI Dump Kernel SYSBOOT May 16 2023 13:21:17
**** OpenVMS x86_64 Operating System V9.2-1 - BUGCHECK ****
** Bugcheck code = 0000035C: PGFIPLHI, Pagefault with IPL too high
** Crash Time: 16-JUN-2023 00:31:28.20
** Crash CPU: 00000000 Primary CPU: 00000000
** Highest CPU number: 0000000D
** Active CPUs: 00000000.00003FFF
** Current Process: "STARTUP"
** Current PSB ID: 00000001
** Image Name: DMM1:[SYS0.SYSCOMMON.][SYSEXE]SYSMAN.EXE;1
** Error logs not dumped, system disk is write locked.
** No useable system memory dump file found.
Restarting the system...