Code: Select all
Execution phase starting ...
The following products will be installed to destinations:
VSI AXPVMS AVAIL_MAN_BASE V8.4-2L1 DISK$ALPHASYS:[VMS$COMMON.]
VSI AXPVMS CDSA V2.4-320A DISK$ALPHASYS:[VMS$COMMON.]
VSI AXPVMS DWMOTIF V1.7-F DISK$ALPHASYS:[VMS$COMMON.]
VSI AXPVMS DWMOTIF_SUPPORT V8.4-2L1 DISK$ALPHASYS:[VMS$COMMON.]
VSI AXPVMS HPBINARYCHECKER V1.1-A DISK$ALPHASYS:[VMS$COMMON.]
VSI AXPVMS KERBEROS V3.1-152A DISK$ALPHASYS:[VMS$COMMON.]
VSI AXPVMS OPENVMS V8.4-2L1 DISK$ALPHASYS:[VMS$COMMON.]
VSI AXPVMS SSL V1.4-502A DISK$ALPHASYS:[VMS$COMMON.]
VSI AXPVMS SSL1 V1.0-2JA DISK$ALPHASYS:[VMS$COMMON.]
VSI AXPVMS TCPIP V5.7-13ECO5F DISK$ALPHASYS:[VMS$COMMON.]
VSI AXPVMS TDC_RT V2.3-1220 DISK$ALPHASYS:[VMS$COMMON.]
VSI AXPVMS VMS V8.4-2L1 DISK$ALPHASYS:[VMS$COMMON.]
Portion done: 0%...10%
%PCSI-E-WRITEERR, error writing DISK$ALPHASYS:[VMS$COMMON.][SYSLIB]DECW$OPENGLPEERRI.EXE
;1
-SYSTEM-F-CTRLERR, fatal controller error
-SYSTEM-W-PFMBSY, page fault monitor is in use
%PCSI-E-OPFAILED, operation failed
Terminating is strongly recommended. Do you want to terminate? [YES]
Initially I built the `disk.img` file with `$ truncate -s 10G disk.img` as per the instructions in https://github.com/lenticularis39/axpbo ... tion-guide I did wonder if a fragmented file was being created so have tried two other techniques: using `VMmanager` to create the file and most recently using:
Code: Select all
$ dd if=/dev/zero of=disk.img.2 bs=10M count=2048
2048+0 records in
2048+0 records out
21474836480 bytes (21 GB, 20 GiB) copied, 122.937 s, 175 MB/s
OS: AlmaLinux 8.6
Disk: Ext3 logical volume on an underlying RAID5 over SATA.
Axpbox: 1.1.0